Tape; Listening To A Cassette; Recording A Compact Disc - Samsung MAX-KDZ150 Instruction Manual

Listening to a Cassette

GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio
Cassettes" on page 35.
1
Switch the system on by pressing the Standby/On button.
2
Select the TAPE function by pressing TAPE button on the front
panel.
Open either cassette deck 1 or 2 by pushing and releasing the deck
3
cover where Push Eject ( ) is written.
Insert the pre-recorded cassette with the open edge of the tape
4
facing downward.
Close the deck by pushing on it until it clicks into place.
5
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter numeric.
If you have inserted two cassettes, press the Deck 1/2 button on
6
the front panel to select the cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
To listen to...
Side A
Side B
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions
8
as required.
To...
Rewind the cassette
Fast-forward the cassette
Cancel this function, press the Stop ( ) button .
9
2,7
1
29
Press ...

TAPE (

) once
TAPE ( ) twice
Press ...
(
(
6
P
8 8
9

Recording a Compact Disc

The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing Standby/On button.
2
Insert a blank cassette in Deck 2.
3
Select the DVD/CD function by pressing DVD/DVD-OK(
on the front panel.
4
Load the compact disc.
5
Select the required disc.
6
Select the required track on the compact disc and press the DVD/DVD-OK(
button on the front panel or Play/Pause(
set the compact disc player to Pause mode.
Press the REC/Pause.
7
Result: REC is displayed.
Press the DVD/DVD-OK(
8
Result: The track is recorded on the cassette.
9
To stop recording, press the Stop( ) button.
)
)
1
) button on the remote control to
) to start playing the track.
7
3,6,8
9
) button
)
P