Table of Contents
Advertisement
Selecting the Cassette Playback Mode
Your mini component system has three cassette playback modes which enable you
to listen to both sides of a cassette automatically.
Press REVERSE MODE until the appropriate
symbol is displayed.
One side of the selected cassette and
•
:
then stops.
•
One side of the cassette.
:
The other side of the cassette and then
stops.
•
Both sides of the cassette indefinitely
:
until you press stop.
Tape Counter
When playing a cassette in one of the cassette
decks, a counter is displayed to enable you to
take note of the counter value at the start of
each track to start playback at the
beginning of the track to which you wish to
listen.
•
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
•
Each cassette deck has a separate counter.
61
Coping a Cassette(Dubbing)
ou can copy a cassette from TAPE 1 to TAPE 2.
Y
• Normal speed dubbing in selecting Tape function mode.
• You do not need to adjust the volume, as it has no effect on the recording.
• Take care not to insert the tape to be copied in TAPE 2, as it will be erased when
you start recording.
Switch the system
1
2
Insert a blank
on by pressing
cassette in TAPE 2.
STANDBY/ON.
Press DUBBING
4
5
Press
button to copy a
STOP button.
cassette.
•
The appropriate indications
are displayed and the cassette
in TAPE 1 is copied to the
cassette in TAPE 2.
Insert the tape to
3
be copied in
TAPE 1.
62
Advertisement
Table of Contents
