Rec Lamp; Wind Cut - Samsung VP-D73 Owner's Instruction Book

ENGLISH
Advanced Recording

REC LAMP

The REC LAMP function works in CAMERA mode only.
You can turn the REC indicator on or off during recording.
1. Set the camcorder to CAMERA mode.
2. Press the MENU ON/OFF button.
The menu list will appear.
3. Turn the MENU DIAL to highlight REC LAMP.
4. To turn the REC indicator ON or OFF during recording, press the ENTER button.
The REC LAMP menu is changed to ON or OFF respectively.
If you want to turn off the indicator, set the REC LAMP to OFF.
5. To exit, press the MENU ON/OFF button.

• WIND CUT

The WIND CUT function works in CAMERA mode only.
The WIND CUT function minimizes wind noise or other noise during recording.
- When the wind cut is on, some low sounds are cut out along with the sound of the wind.
The WIND CUT selecting method is the same as the REC LAMP mode.
46
(MENU) SP STBY (MENU)
DSE SELECT ...........OFF DSE SELECT ...........OFF
W.BALANCE.............AUTO W.BALANCE.............AUTO
SHUTTER.................AUTO SHUTTER.................AUTO
IRIS...........................AUTO IRIS...........................AUTO
REC MODE ..............SP REC MODE ..............SP
REC LAMP ...............ON REC LAMP ...............OFF
: MENU : MENU
SP STBY