Bosch 0 611 911 0L3 Original Instructions Manual page 16

16 | English
Cordless Drill/Driver
Tool holder
Max. screw diameter
Weight according to EPTA-Procedure
A)
01:2014
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
C)
tion and during storage
Recommended rechargeable batteries
Recommended battery chargers
A) Depends on battery in use
B) Measured at 20−25 °C with rechargeable battery 2.0 Ah.
C) Limited performance at temperatures <0 °C
Noise/vibration information
Noise emission values determined according to EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is: Sound pressure level 88 dB(A); sound power level 99 dB(A). Uncer-
tainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1.
h
Drilling into metal:
a
h
K
Impact drilling into concrete:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
1 609 92A 7XD | (26.10.2022)
GSR 180-LI
1.5–13
mm
kg 1.6–2.6
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
GSR 180-LI
2
m/s <2.5
2
m/s
2
m/s
2
m/s
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Charging the Battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
GSB 180-LI
1.5–13
10 10
1.7–2.7
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
GSB 180-LI
<2.5
1.5 1.5
– 11.0
– 1.5
Bosch Power Tools