Connecting To A Tv Which Has No Audio And Video Input Jacks; Playback - Samsung VP-D26 Owner's Instruction Book

Playback

Connecting to a TV which has no Audio and Video input jacks

You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder and VCR with the Audio/Video cable.
The yellow plug : Video
The white plug : Audio(L)
The red plug : Audio(R) - STEREO only
2. Connect a TV to the VCR.
3. Set the power switch on the camcorder to PLAYER mode.
4. Turn on both the TV and VCR.
Set the input selector on the VCR to LINE.
Select the channel reserved for your VCR on the TV set.
5. Play the tape back.
Playback
You can play the recorded tape in PLAYER mode.
1. Connect a power source and set the power switch to PLAYER mode.
2. Insert the tape you wish to play back.
3. Using the (FF) and
you wish to play back.
4. Press the (PLAY/STILL) button.
The images you recorded will appear on the TV after a few seconds.
If a tape reaches its end while being played back, the tape will rewind automatically.
Reference
The playback mode (SP/LP) is selected automatically.
(REW) buttons, find the first position
ENGLISH
VIDEO
AUDIO(L)
VCR
AUDIO(R)
S-VIDEO
S-VIDEO
A/V
TV
ANTENNA
CAMCORDER
71 71