Using A Display Deck (Depending On The Model); Inserting The Batteries In The Remote Control - Samsung SP-42Q2 Owner's Instructions Manual

ENG
SP43W6
SP54T8
Using a Display Deck

Inserting the Batteries in the Remote Control

8
(depending on the model)
You can display a VCR or DVD Player, etc. by using the display
deck.
1
Hold the center of the door and lift it up in the direction of arrow.
2
After placing a component you have in the display deck, hold the
center of the door and pull it down.
➢
You should display only the component that is within
126mm high. When displaying a component in the
display deck, please space it out 30mm from the front,
20mm from either end.
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
◆
+ on the battery against + on the remote control
◆
- on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
SP54T8