ENG
Switching Your Television On and Off
Placing Your Television in Standby Mode
12
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the " I " button (On/Off) on the front or side of the television.
Result:
The Standby indicator on the front of the television
lights up.
3
Press the POWER (
television on.
Result:
The programme that you were watching last is re-
selected automatically.
➢
If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on page
20 or "Storing Channels Manually" on page 22.
4
To switch your television off, press the " I " button (On/Off) again.
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2
To switch the television back on, simply press the POWER (
button again.
➢
You can also switch on by pressing the TV (
button.
☛
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the " I "
button (On/Off) on the front or side of the television. It is
best to unplug the set from the mains and aerial.
) button on the remote control to switch the
) button on the remote control.
)
) or P
/