Table of Contents
Advertisement
Others
1. Cleaning of main unit
Visually confirm the appearance of the main unit. If there is dirt,
for cleaning, please turn off the power supply and gently wipe
it with cloth that is soaked in soapy water or warm water then
wrung.
2. Cleaning of cuff
When there is dirt on the cuff, please gently wipe it with cloth that is soaked
in soapy water or warm water then wrung.
3. To prevent infection, the cuff shall be cleaned regularly.
4. Cleaning precautions
Before cleaning the device, please take the batteries out.
Do not wash the device or cuff with water;
Please keep the device away from dust or water vapor;
Do not try to clean the cuff by washing machine or rubbing;
Do not use alcohol, gasoline or thinner for cleaning, otherwise it will cause
cracking or discoloration.
Do not drop the main unit on the ground to avoid collision or strong impact.
(Otherwise, it will cause malfunction)
Avoid storing the device in an environment with high temperature, humidity
or direct sunlight. (Otherwise, it will cause malfunction or discoloration)
Do not allow dust or foreign matter to enter. (Otherwise, it will cause
malfunction)
Do not use it immediately after taking it out from a place below 0°C. Keep it
in a warm environment for at least 1 hour. (Otherwise, it will cause inflation
failure)
26
Cleaning frequency/maintenance cycle
Product care
Care and maintenance
Advertisement
Table of Contents
