Advertisement
SVC guide for replace sheath heater
10. Replace a new sheath heater, insert to the
bracket hole at left-side bottom
13. Put back the 2 hooks into case inner, reseat
the evaporator assembly
SVC Video guide for replace sheath heater (Double click)
11. Re-attach the sheath heater to the Evaporator
14. Reconnect 4 housing( 1 is for EVA, and 3
for cover assembly grill), push back in ( use
rubber hammer if possible to make grill fan
assembly seated properly)
12. Re-tie lead wire and sensor at 3 initial positions
15. Check grill fan assembly good
No gap between the grill fan and
inner case
All the hook seat in hole properly
and then assemble the Freezer Door
And power on and error code check
27
Advertisement
