LG WM2233H 01 Series Service Manual page 37

PUMP
HEATER
THERMISTOR
CONNECTOR
① ① Disassemble the cabinet cover.
② ② Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
③ ③ Disassemble the pump assembly in arrow
direction.
① ① Disassemble the cabinet cover.
② ② Separate 2 connectors from the heater.
③ ③ Loosen the nut and pull out the heater.
※ ※ CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
• Tighten the fastening nut so the heater is
secure.
① ① Disassemble the Back cover.
② ② Unscrew a screw from the Tub.
③ ③ Unplug the white connector from the thermistor.
④ ④ Pull it out by holding the bracket of the
thermistor.
36