Related Manuals for Hyundai HBT75-3
Summary of Contents for Hyundai HBT75-3
- Page 1 PETROL SHREDDER HBT75-3 WARNING: Read thoroughly the instruction manual before use.
-
Page 2: General Safety Rules
GENERAL SAFETY RULES Warning symbol Caution: Read carefully the manual before use. Danger - Rotating blades. Keep hands and feet out of openings while machine is running Keep bystanders away Wear eye and ear protection 2 / 21... - Page 3 Do not use as a step Wear protective gloves Wear safety footwear Danger – risk of fire Caution – hot surface Warning – exhaust gas. Do not inhale them Guarantee sound power level 3 / 21...
-
Page 4: Read Carefully Before Use
IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE Training Become familiar with the owner's manual before attempting to operate this equipment. Preparation 1) Do not allow children to operate this equipment; 2) Do not operate this equipment in the vicinity of bystanders; 3) Do not run engine powered machines in an enclosed area since the exhaust from an engine contains carbon monoxide, which is colourless, odourless, and tasteless;... - Page 5 4) Keep proper balance and footing at all times. Do not overreach. Never stand at a higher level than the base of the machine when feeding material into it; 5) Always stand clear of the discharge zone when operating this machine; 6) When feeding material into the machine be extremely careful that pieces of metal, rocks, bottles, cans or other foreign objects are not included;...
-
Page 6: Intended Use
INTENDED USE This shredder is intended for mulching garden and pruning waste such as green branches, twigs, brush, vines, and long grasses. DO NOT use this shredder for chipping construction debris, plastic, paper products, rope or twine, or any material that may contain metal. GENERAL IDENTIFICATION 1. - Page 7 ASSEMBLY INSTRUCTIONS Hopper installation 1. Carefully insert the hopper into the hopper holder (Fig. A) 2. Locate the screws (total 4 screws) to correct position. 3. Fasten the screw completely. Fig A Dustbin installation 1. Install the handle on the dustbin (on the side without the key) and screw it into place. 2.
- Page 8 3. Insert the dustbin into body (Fig B), make sure the key well connected with transverter. (Fig C) 4. Use the safe key to lock the dustbin well. ( Fig D) Fig B Fig D Fig C Wheel installation Place the wheels on both sides at the bottom of the machine. Secure them with a bolt and a flat washer.
- Page 9 OIL AND FUEL FILLING WARNING! Engine delivered without oil or fuel: Fill up with gasoline and oil before starting the engine: 1) Fuel Recommended fuel: unleaded petrol with an octane rating of at least 87. Open the fuel tank cap. Pour the fuel carefully into the tank without overflowing. Never exceed the maximum level.
-
Page 10: Starting The Engine
STARTING THE ENGINE Turn engine switch to ON position.(Fig F) Press the primer button 3 times. (Fig G) Pull the recoil starter handle gently until it engages the give it a good strong pull to start the engine. (Fig H) Engine switch Fig F Fig G... -
Page 11: Maintenance
Fig J 3. MATERIAL PUSH STICK User supplied push stick to push remaining material into hopper opening. DO NOT USE HANDS. (Fig K) Fig K MAINTENANCE WARNING! Priors to any maintenance, to stop engine and switch if off first. WARNING! Disconnect spark plug wire from the spark plug to prevent unintentional engine starting. - Page 12 WARNING! Unintentional start-up can result in entanglement, traumatic amputation, or laceration. CAUTION: Use only genuine replacement engine parts. None compliant parts may damage the engine, and may result in injury. In addition, use of other parts may void your warranty rights. Regular maintenance will improve the performance and extend the life of the engine.
-
Page 13: Blade Maintenance
BLADE MAINTENANCE WARNING! Before removing Top Hopper screw, ensure the machine is switched off, and the machine is completely stopped. WARNING! Take extreme care not to come in contact with cutting blades. Danger! WARNING! If ejection chute becomes clogged or cutting blades become jammed, under no circumstances should you place your hands in ejection chute to try to clear obstruction, as this will lead to serious injury. -
Page 14: Draining The Oil
Fig N DRAINING THE OIL 1. Leave the engine running until the fuel runs out and wait for the engine to stop and cool down slightly. 2. Disconnect the spark plug. 3. Remove the oil drain plug (A). Empty the oil into a suitable container. (Fig. O) 4. -
Page 15: Air Cleaner Maintenance
AIR CLEANER MAINTENANCE A dirty air filter will increase air intake restriction. Periodical maintenance or air filter will help to improve engine performance and reduce emissions. WARNING! Never clean air filter with gasoline or an easy ignited solvent it may cause explosion. -
Page 16: Transporting And Storage
Fig Q WARNING! An incorrectly tightened spark plug may result in poor engine performance and permanent engine damage. COMBUSTION DEPOSITS We recommend that you should remove combustion deposits from the cylinder head, top of piston, and around valves after every 100-300 hours of usage. MUFFLER WARNING! If engine just running down, do not touch muffler. - Page 17 Fig R WARNING! When you service the engine, inspect the blade, or clean the underside of the housing, make sure to always tip the engine with spark plug up. Transporting or tipping the engine with the spark plug down will cause: 1.
- Page 18 BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux - France Declare that the following tool: Petrol Shredder HBT75-3 Serial number: 20211159200-20211159349 Is in conformity with the requirements of the Directive Machine 2006/42/EC and to the followings Europeans Directives:...
-
Page 19: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 20: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 21: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...