Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hyundai HYCH2800ES
Summary of Contents for Hyundai HYCH2800ES
- Page 1 GARDEN SHREDDER HYCH2800ES Instruction Manual...
- Page 2 USING THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. Failure to do this may result in personal injury or damage to the product.
-
Page 3: Table Of Contents
Contents Safety Information.....4-15 Useful Information......34 Understand Your Machine.......4 Our YouTube Channel........34 Personal Safety..........5 Warranty............34 Inspect Your Machine........6 Manual Updates..........34 Work Area............7 Returning Your Product.........34 During Use..........8-10 Leaving A Review...........34 Batteries............10 Ordering Spare Parts........34 Electrical Safety..........11 Contact Us........35 Vibrations............12 Noise..............12 Personal Protective Equipment......13 Intended Use..........14 Symbols On The Machine......15 Features........16-17... -
Page 4: Safety Information
Safety Information Safety No list of safety guidelines can be complete. Every environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious injury, damage to equipment, or poor work results. -
Page 5: Personal Safety
Safety Information Personal Safety • WARNING! Never allow children or people unfamiliar with these instructions to use the product. Local regulations can restrict the minimum age of the operator. • Keep children, pets, and other people not using the unit away from the work area (at least 15m). -
Page 6: Inspect Your Machine
Safety Information Inspect Your Machine • Check your machine before starting it. Keep guards in place and in working order. Make sure all nuts, bolts, etc., are securely tightened. • You must check the general condition of the machine before use. •... -
Page 7: Work Area
Safety Information Work Area • You must only work in daylight or with good artificial light in good visibility conditions. Do not work at night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of the area. -
Page 8: During Use
Safety Information During Use • Do not operate the machine in confined areas where there may be a risk of crushing the operator between the machine and another object. • Walk, never run with the machine. Be very careful when pulling the machine toward you. You must look behind you to make sure there are no obstacles before and during operations. - Page 9 Safety Information During Use (Continued) Switch off the device immediately and wait until all moving parts have come to a standstill in the event of a foreign object being struck or if the device begins to make unusual noises or vibrate. Disconnect the machine from the power source and take the following steps before restarting and operating the machine: •...
-
Page 10: Batteries
Safety Information During Use (Continued) • Do not allow the shredded material to build up to a level where it blocks the discharge chute. If the material builds up too far it could reach the cutting blades and be thrown out of the in-feed chute. -
Page 11: Electrical Safety
Safety Information Electrical Safety (Where Applicable) DANGER! ELECTRICITY CAN KILL - NEVER WORK ON LIVE/ENERGISED EQUIPMENT. • Prior to carrying out any maintenance work you MUST identify electrical isolation methods and isolate all electrical supplies. • Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs and connectors for the following;... -
Page 12: Vibrations
Safety Information Vibrations (Where Applicable) • Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death. -
Page 13: Personal Protective Equipment
Safety Information Personal Protective Equipment Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. No protective equipment can ensure 100% protection. When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit, etc. If more than one item of PPE is worn at the same time, make sure they can be used together, e.g. -
Page 14: Intended Use
Safety Information Intended Use The HYCH2800ES is an electric garden shredder from HYUNDAI. The garden shredder is manufactured according to the latest safety requirements. Every precau- tion is only effective when it is followed exactly. Intended Use The machine is designed exclusively for shredding fibrous or woody garden waste such as hedge and tree trimmings, branches, bark or fir cones. -
Page 15: Symbols On The Machine
Safety Information Symbols On The Machine We have provided safety messages in this manual and on the machine. This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully. However, we may not have listed all of the possible hazards, you must also use your own judgment. -
Page 16: Features
Features HYCH2800ES Features www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk... - Page 17 Features HYCH2800ES Features Handle Feeder Hopper Safety Switch On / Off Switch Forward / Reverse Switch Plug Lock Button Collection Box Support Foot Wheel www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk...
-
Page 18: Unboxing
Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI Power Products immediately. You must keep the packaging material in case the machine needs to be returned or repaired. -
Page 19: Assembly
Assembly Assembly Safety CAUTION - This guide is meant to serve as a quick reference for operating your HYUNDAI machine. We always advise reading the manual in full before operation. NOTE - Images may vary depending on model. NOTE - The machine may be supplied with some parts already assembled. Prior to assembly, check all items have been received. -
Page 20: Wheel Assembly
Assembly Step 1 : Wheel Assembly Turn the shredder upside down and pivot the legs up ward. (Fig. 1A) Place the supplied wheel axle (A) through the respective openings. (Fig. 1A) Put the supplied washer (B) and sleeve (C) onto the wheel axle. (Fig. 1B) Please the wheels (D) and install nut hand tight (E). -
Page 21: Install Collection Box
Assembly Step 2 : Install Collection Box Press down the lock button (A) and then insert the collection box into the undercarriage. (Fig.2) Press the lock button upward before use. (The machine will not run without the button in the up position). -
Page 22: Operation
Operation Overload Protection This machine is equipped with an overload protection system. To protect the motor from being damaged, the safety switch will automatically switch off the power when the motor is overloaded. Wait at least 1 minute before restarting by first pressing the reset button and then the ON / OFF switch. -
Page 23: Instructions For Use
Operation Instructions For Use Place the material to be shredded in the opening on the right side. It will the be automatically drawn into the machine be the cutter as it turns anticlockwise. Maximum diameter 44mm. Do not stuff the opening completely full to avoid jamming the machine. Alternate feeding branches and small litter that is a bit wet and decomposed. -
Page 24: Starting / Stopping
Starting / Stopping YOU MUST read and understand the full safety instruction manual before starting the machine. Starting Press the forward / reverse switch (A) to position. Press the ON / OFF switch (B) to ON (I) position to start the motor. Stopping Press the ON / OFF switch (B) to OFF (O) position to stop the motor. -
Page 25: Maintenance
Maintenance Maintenance Safety IMPORTANT - Routine and accurate maintenance is essential for maintaining original machine safety and performance levels. WARNING - Before cleaning or doing maintenance work, you need to stop the machine, unplug from the power source and read the relevant instructions. You need to wear proper clothing and protective gloves whenever your hands are at risk. -
Page 26: Checking Your Machine
Maintenance Checking Your Machine When checking your machine, we recommend you: • Check for worn or damaged parts. • Make sure all nuts, screws and bolts are tight. • Make sure all warning stickers are in place and not damaged. Cleaning CAUTION - DO NOT use a hose pipe or pressure washer to clean the machine. -
Page 27: Storage
Maintenance Storage Where To Store Store in a cool, dry place away from sources of ignition and varying changes in temperature. Store on a flat and level surface with all wheels on the ground. DO NOT stack other items on top of the machine when in storage. Store the machine in a safe place, out of the reach of children or anyone who is not familiar with operation. -
Page 28: Adjusting The Counterplate
Maintenance Adjusting The Counterplate To obtain an optimum shredding result and prevent damage to the blade, the counterplate must be adjusted at regular intervals. The counterplate must also be adjusted if so called interlinkage occurs. Turn Counterplate Adjusting Knob (A) clockwise until a slight friction noise can be heard and fine aluminum chips fall from the ejector chute for a short period of time. -
Page 29: Troubleshooting
Maintenance Troubleshooting Problem Possible Cause Possible Solution The motor does not run Safety switch Check if the switch still functions well Power failure Check the power supply cable, the plug and the house fuse The material to be chopped is The material is jammed in the Switch the shredder OFF. -
Page 30: Technical Data
Technical Data Specifications Model HYCH2800ES Electric Garden Shredder Rated Voltage / Mains Frequency 230V - 50Hz Rated Input 2800W Speed 60rpm Brand Diameter Max. 44mm (Depends On The Hardness Of The Wood) Safety Class Degree Of Protection IPX4 Collection Box Capacity Measured Sound Power Level 91.7dB(A) -
Page 31: Recycling And Disposal
Recycling And Disposal Recycling And Disposal We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or Batteries is passed onto you by us. So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site. -
Page 32: Our Product Range
Our Product Range Generators Mini Dumpers Leisure Inverter, Petrol, Diesel And Built-In 4-Wheel Drive Mini Dumpers And Tracked Motorhome Generators Dumpers Pressure Washers Yard Sweeper Petrol, Diesel And Electric Pressure Washers Self Propelled Yard Sweeper Power Brush Water Pumps Scarifiers Submersible, Clean And Dirty Water And Petrol Lawn Scarifier And Aerator Professional Chemical Water Pumps... -
Page 33: Declaration Of Conformity
HYCH2800E Chipper/Shredder 2800W 91.7dB(A) 96dB(A) Product Details: Brand: Hyundai Model: HYCH2400E, HYCH2800E Description: Electric Chipper/Shredder Name and address of technical documentation holder and EU distributor: Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW, UK. Signed by: Roland Llewellin, Managing Director Date: 14/11/2020 www.hyundaipowerproducts.co.uk... -
Page 34: Useful Information
Go to www.hyundaisupport.co.uk or search ‘Hyundai Power Products’ in YouTube. Warranty Proof of purchase will be required before you make a warranty claim. Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website: www.hyundaipowerproducts.co.uk Manual Updates Our manuals are constantly being reviewed and updated. -
Page 35: Contact Us
Need Help? Talk To Our Experts Contact Us Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687880, open Monday-Friday 8.30am-5pm. Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Live chat is open Monday-Friday from 8.30am-5pm. Post Genpower Limited, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW, UK. - Page 36 Isaac Way, London Road, Pembroke Dock, UNITED KINGDOM, SA72 4RW T: +44 (0) 1646 687 880 F: +44 (0) 1646 686 198 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported/Distributed by Genpower Ltd for The United Kingdom & Ireland Licensed by Hyundai Corporation, Korea...