Hard drives
Follow these steps to remove a 3.5-inch hard drive:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the drive cage (see
4.
Remove the two Torx-15 M3.0×9.0 screws (1) that secure the 3.5-inch hard drive to the drive cage.
5.
Slide the 3.5-inch hard drive (2) to the right, and then remove the 3.5-inch hard drive.
Follow these steps to remove a 2.5-inch hard drive:
1.
Prepare the computer for disassembly (see
2.
Remove the access panel (see
3.
Remove the drive cage (see
4.
Remove the three Torx-15 M3.0×9.0 screws (1) that secure the 2.5-inch hard drive to the drive cage.
38
Chapter 4 Removal and replacement procedures
Preparation for disassembly on page
Access panel on page
32).
Drive cage on page
36).
Preparation for disassembly on page
Access panel on page
32).
Drive cage on page
36).
31).
31).