Table of Contents
Advertisement
Read before Operation
Remote Controller
Signal transmitter
Send signal to the indoor side
POWERCHILL button
Press this button to select Powerchill
function.
MODE button
,. *
Selects the operation mode.
FAN
DRY
l
COOL
---+ I) ---+ �
ECONO button
Starts ECONO operation.
OFF TIMER button
Press this button and adjust the OFF TIME
The time can be set between 1 to 9 hours.
TIMER CANCEL button
Cancels the timer setting.
NOTE
■ Notes on remote controller
•
Never expose the remote controller to direct sunlight.
•
Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off
dust with soft cloth.
•
Signal communication may be disabled if an electronic-starter-type
fluorescent lamp (such as inverter-type lamp) is in the room. Consult the
shop if that is the case.
•
If the remote controller signals hapen to operate another appliance, move
that appliance to somewhare else or consult your service center
�DAIKIN
7
Display (LCD)
Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
ON/OFF button
Press this button once to start
operation.
Press once again to stop it.
FAN setting button
Selects the airflow rate setting
every time you press this button.
1 :
I
t
Auto
1�---1
High
In DRY mode, FAN speed setting is
not available.
SWING button-,O.
__
__,
....,
Adjusts the airflow direction.
When you press SWING button, the flap
moves right & left. The flap stops when you
press SWING button again.
GOOD SLEEP button
Press this button to activate
good sleep feature.
ON TIMER button
Press this button and adjust the ON TIME
The time can be set between 1 to 12 hours.
➔
I
�
I
+
Low
+-
I
� .
I
Medium
3
Advertisement
Table of Contents
