Samsung PS-42P3ST Owner's Instructions Manual page 15

BN68-00528A-01_ENG 2003.11.20
Connecting Speakers
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching
the "+" and "-" ends of the cable with the diagram on the PDP.
The speakers MUST have to a power handling capability of 10 watts minimum
(impedance 8Ω).
When you connect the speaker wire to the external speaker out connector, first bind the
speaker wire round the ferrite core to secure it.
Ferrite Cores
The ferrite cores are used to attenuate undesired signals.
When connecting cables, attach one of these ferrite cores to the cable
near the connector.
4:14 PM Page 15
(continued)
ENG
15