Memorizing The Channels - Samsung PL-42E71S Owner's Instructions Manual

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (air) and cable channels.
After the available channels are memorized, use the CH
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the
TV (i.e. an air or a cable system).
T V Channel
Air/Cable : Air
Auto Program
Channel Manager
Fine Tune
Move Enter
T V Channel
Air/Cable : Air
Auto Program
Channel Manager
Fine Tune
Move Enter
Storing Channels in Memory (Automatic Method)
T V Channel
Air/Cable : Air
Auto Program
Channel Manager
Fine Tune
Move Enter
Auto Program
Start
Enter
1. Press the MENU button to display the menu.
Press the ... ... or † † button to select "Channel", then press the ENTER button.
Return
2. Press the ENTER button select "Air/Cable".
Press the ... ... or † † button to select "Air", "STD", "HRC" or "IRC", then press the
Air
ENTER button.
STD
HRC
➢
If you are using an Air antenna, leave "Air" displayed. If you are using a cable antenna,
IRC
press the ... ... or † † button to display the type of cable system: "STD", "HRC" or "IRC".
(If you are not sure which type of cable system you have, contact your cable company).
Press the EXIT button to exit.
Return
➢
STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area. At this
point the signal source has been selected.
1. Press the MENU button to display the menu
Press the ... ... or † † button to select "Channel", then press the ENTER button.
2. Press the ... ... or † † button to select "Auto Program", then press the ENTER button.
Return
3. Press the ENTER button.
The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Air 3
Press the ENTER button to stop.
Press the EXIT button to exit.
➢
• All available analog channels are automatically stored in memory.
Return
• It takes approximately 3 to 10 minutes to memorize channels.
or CH button to scan through the channels.
English-19
.