Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung PL-42E71S Owner's Instructions Manual

Operation

Turning the TV On and Off

Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Plug & Play
Start Plug & Play
OK
Enter
Plug & Play
English
Language
Français
Español
Português
Move Enter
Plug & Play
Check antenna input.
OK
Enter
Plug & Play
Air
Air/Cable
STD
HRC
IRC
Move Enter
Plug & Play
Start
Enter
Plug & Play
Clock Set 12 : 00
Move Adjust Enter
Enjoy your watching.
OK
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed.
Press the ENTER button to select OK. The Language menu is displayed.
➢
The Language menu will automatically appear after several seconds, even if the
ENTER button is not pressed.
Exit
2. Select the appropriate language by pressing the ... ... or † † button.
Press the ENTER button to confirm your choice.
The message "Check antenna input" is displayed.
➢
The message Check antenna input will automatically appear after several seconds,
even if the ENTER button is not pressed.
Skip
3. Press the ENTER button to select OK.
The menu to select signal source is displayed.
Skip
4. Select the correct signal source (Air, STD, HRC, and IRC) by pressing the
... ... or † † button, then press the ENTER button.
Skip
5. To start the channel search, press the ENTER button.
➢
The search will end automatically. Channels are sorted and stored in an order which
Air 3 reflects their position in the frequency range (with lowest first and highest last).
When it has finished, the Clock Set menu is displayed.
➢
To stop the search before it has finished or return to normal viewing, press the
MENU button.
Skip
6. Press the ENTER button.
Press the œ or √ button to move to the hour, minute, or am/pm.
Set the Hour, Minute, or am/pm by pressing the ... or † button.
am
Press the ENTER button.
➢
You can set the Hour and Minute directly by pressing the number buttons on the
remote control.
Skip
7. When it has finished, the message "Enjoy your watching" is displayed, and the
channels which have been stored can be viewed.
English-16
Continued...