Honda CRF50F Owner's Manual page 34

37GJGA00.book 24 ページ ２０２１年３月５日 金曜日 午後２時５０分
Adjust by turning the rear brake adjusting
nut a half-turn at a time. Make sure the cut-
out on the adjusting nut is seated on the
brake arm pin (3) after making final
freeplay adjustment.
4. Apply the brake several times and check
for free wheel rotation after the brake
pedal is released.
If proper adjustment cannot be obtained by
this method, see your dealer.
After adjustment, push the brake arm (4) to
confirm that there is a gap between the
adjusting nut (2) and the brake arm pin (3).
24
(2)
(3)
(2) Adjusting nut (4) Brake arm
(3) Brake arm pin
After adjustment, confirm the freeplay of
the brake pedal.
Other Checks:
Make sure the brake rod, brake arm, spring
and fasteners are in good condition.
(4)