ENG
Rear of the TV
Rear of the TV
DECODER
Connecting the Aerial or Cable Television Network
or
Cable Television
Network
Connecting a Decoder
SCART
6
To view television channels correctly, a signal must be received by
the set from one of the following sources:
N An outdoor aerial
N A cable television network
Connect the aerial or network input cable to the 75Ω coaxial socket on
the rear of the television.
In order to descramble a coded transmission signal, you must
connect a decoder to the TV set.
➢
If you wish to connect both a decoder and a VCR, you
should connect the:
N Decoder to the VCR
N VCR to the television
Otherwise, connect the decoder directly to the television.
Connect the receiver SCART cable to one of the SCART connectors on
the rear of the television.