Separate Vhf And Uhf Antennas; Connecting Cable Tv; Cable Without A Cable Box; Connecting To A Cable Box That Descrambles All Channels - Samsung CSN2077DV Owner's Instructions Manual

I
N S TA L L AT I O N

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires a an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner into
the VHF/UHF terminal
on the bottom of the
rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1
Plug the incoming cable
into the VHF/UHF
antenna terminal on back
of the TV.

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box.
2
Connect the other end
of this cable to the
VHF/UHF antenna
terminal on the back of
the TV.
2.2
C T : I
HAPTER WO NSTALLATION
Because this TV is cable-ready,
you do not need a cable box to view
unscrambled cable channels.
This terminal might be labeled
"ANT OUT," "VHF OUT," or simply,
"OUT."