02890B(E)-CHAPTER 3
9/30/03
O
Viewing a VCR or Camcorder Tape
You must select the appropriate mode in order to view the VCR or
Camcorder signal on the TV.
1
Press the MENU button to
display the menu.
Press the CH M button
twice to select
"Channel", then press the
VOL+ button.
4
Press the MENU button
twice to exit.
Note: In the AV mode, the software available in all of the NTSC, PAL &
SECAM devices is displayed on the screen after automatically judging the
TV system.
28
7:13 PM
Page 28
P E R AT I O N
2
Press the CH M button
twice to select the
"TV/AV".
3
Press the VOL+ or VOL-
button .
You will switch between
viewing the signals com-
ing from equipment con-
nected to the TV's A/V
jacks, and the TV signal.