Operating Your Washer - LG TCW2013LS Owner's Manual

OPERATING YOUR WAShER

1. Ready mode
1) Coin / Card type
– The cycle LEDs flash at the same time,
when the price of cycles are equal.
2) OPL type
– The cycle LEDs is lit at the same time, and
displayed PUSH.
2. Insert card/coin (not for OPL type)
Insert a cash card that has a sufficient balance.
The card balance should be more than the
programmed vend price for a selected cycle.
NOTE
• When the card balance is not enough,
machine displays the card balance for
5 seconds and then displays
message repetitively
• Insert a sufficient amount of change that
is more than the programmed vend price
for the selected cycle.
NOTE
• The machine will not start until sufficient
coins are inserted.
3. Select the cycle
Press the desired button and press the
Start button. The display LED will show the
remaining time and the selected cycle starts.
• Select cycles designed for different types of
fabric and soil levels.
CYCLE Fabric type
Cotton, linen, towels,
Hot
shirts, sheets
Cotton, mixed loads, work
Warm
clothes, jeans, shirts
Cotton, dress shirts,
pants, wrinkle-free
Cold
clothing, cotton/poly blend
clothing, tablecloths
Dress shirts, blouses,
Delicates nylons, sheer or lacey
garments
4. Add super wash
5. Change course
6. Cycle finish
Do not work any button and stop the washer
❋
(When the washer is operating) or (when a
cycle is in progress)
• To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating
this appliance.
Wash/Rinse
Temp.
Hot / Cold
Warm /
Cold
Cold / Cold
Cold / Cold
OPERATING YOUR WASHER
Wash time or rinse cycle can be added
when additional coin is inserted or a valid
cash card is entered.
You cannot change the cycle while the
machine is running.
The machine stops and LED display shows
with beeper sound.
WARNING
21