11 SERVICE WORK ON THE CHASSIS
11.13
58
Checking the steering head bearing play
Warning
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and damages com-
ponents.
–
Correct incorrect steering head bearing play immediately. (Your authorized GASGAS Motorcycles workshop will
be glad to help.)
–
Mount and tighten screw
Guideline
Screw, top
steering stem
S05133-11
–
Using a plastic hammer, tap lightly on the upper triple clamp to
avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Secure the wiring harness with cable holder
S05132-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
bl
screws
Guideline
Screw, brake line
A00885-12
holder
Finishing work
–
Install front fender. (
–
Mount the handlebar cushion.
–
Install the start number plate. (
–
Install the front wheel.
–
Check that the wiring harness, throttle cables, and brake and clutch
lines can move freely and are routed correctly.
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
7
.
M8
20 Nm (14.8 lbf ft)
8
.
M8
M8
25 Nm (18.4 lbf ft)
.
EJOT
p. 62)
p. 61)
(
p. 99)
p. 58)
®
Loctite
243™
20 Nm (14.8 lbf ft)
9
on the left.
bk
.
Loctite
®
243™
1.7 Nm (1.25 lbf ft)
p. 49)