Using Your Steam Pocket - Shark Steam Pocket Mop Owner's Manual

Using Your Steam Pocket

IMPORTANT: Do not use the mop without
attaching a microfiber pocket and adding water
to the tank first. When you are using the mop
for the first time, it might take longer than the
normal 30 seconds to start steaming. Just pump
the handle a few times in a downward motion to
prime the pump.
1
NOTE: Make sure the floors are swept or
vacuumed before using the Steam Pocket
1 Pull and twist the quick release cord holder to
unwrap the power cord completely.
Plug into an electrical outlet The power "On"
light will turn blue, it takes approximately 30
seconds for the mop to heat up and the steam to
be ready.
6 TOLL FREE: 1-800-798-7398
Mop
®
2 Pump the handle a few times in a downward
Mop. motion. This pumping action will release steam
®
as you mop and allows you to customize the
amount of steam you want. Begin mopping with
a forward and backward motion. The natural
motion of mopping will produce steam.
2