Download Print this page

Using Your Portable Steam Pocket - Shark PRO PORTABLE STEAM POCKET Owner's Manual

Hide thumbs Also See for PRO PORTABLE STEAM POCKET:

Advertisement

Using Your Portable Steam Pocket

with Direct Steam Nozzle
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean
hard to reach nooks & crannies and other places where dirt may build up.
Use the Direct Steam nozzle to loosen and dislodge compact dirt often
found in corners and tight places where traditional methods and cleaning
tools tend to push dirt into, making it tough to reach and clean. Spray
direct steam and wipe clean with a wet cloth or paper towel.
fig. 4
1
For spot cleaning and steaming, first
attach the Direct Steam Nozzle by
pressing the nozzle onto the Portable
Steam Pocket
until it clicks
®
into place. (fig. 4)
2
Then press and hold the steam
trigger button to start steaming.
While the steam trigger button is
pressed and held down, the
Power Light will be solid blue. When
released, the Power Light will return
to flashing blue. (fig. 5).
For effective cleaning, hold the
steam output nozzle 1-2 inches away
from the surface you're cleaning.
4
TOLL FREE: 1-800-798-7398
®
fig. 5
CAUTION: Do not press steam
trigger until the Direct Steam Nozzle
is snapped into the main nozzle of
your Portable Steam Pocket
.
®
3
To remove the Direct Steam Nozzle
attachment, press and hold down the
release buttons. Then slide off of the
handheld steamer.
CAUTION: Do not press steam
trigger while removing the Direct
Steam Nozzle. Avoid touching the tip
of the Direct Steam Nozzle, as this
will be very hot after steaming.
NOTE: The Pro Portable Steam
Pocket
®
may continue to emit steam
for a few seconds after the trigger
is released. This is normal, and the
steaming will eventually come to
a stop.
Using Your Pro Portable Steam Pocket
with Accessory Hose
fig. 6
1
Attach the Accessory Hose to the
Portable Steam Pocket
®
by pressing
the hose onto the main nozzle until it
clicks into place. (fig. 6)
2
Select the desired cleaning tool
for use. Follow the cleaning tool
sub-assembly instructions for the
selected tool.
3
To remove the hose, press and hold
down the attachment release button.
Then slide the Accessory Hose off of
the main steamer. (fig. 7)
®
fig. 7
CAUTION: Do not press steam
trigger while attaching or removing
the Accessory Hose.
CAUTION: Do not use the
Accessory Hose without cleaning
tool attached.
www.sharkclean.com
English
5

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Sc3901w