Connecting Your Multimedia Lcd Monitor - Samsung SyncMaster 50X User Manual

4_E50X-3p-28p Page 6 Wednesday, July 11, 2001 12:11 PM
Setting up Your Monitor

Connecting Your Multimedia LCD Monitor

Figure 4. Multimedia connections
1
Follow steps 1 through 3 on the previous page.
2
If you have a Multimedia or Multimedia Pivot stand, connect the attached power
adapter jack (A) to the DC power port on the back of your monitor. Connect the power
cord to the power port on the back of the stand.
3
Follow the directions that came with your sound card or your computer to connect the
speakers and microphone on the stand. See Figure 4, above and Table 1, below.
4
Continue with step 5 on the previous page.
Table 1. Connector locations for multimedia bases
Item Name
Attached power
A
adapter jack
B
Power port
C
Power switch
D
MIC OUT jack
MIC AUDIO
OUT IN
Connect this cable to the DC power port on the
back of the monitor cabinet.
Connect the power cable here.
Use this switch to turn the monitor On and Off.
Connect a cable here to send sound from the
internal microphone to the computer's sound
card.
English 6
Description