Connecting Your Lcd Monitor - Samsung SyncMaster 151MP Owner's Instructions Manual

Setting up Your LCD Monitor

Connecting Your LCD Monitor

4
5
Figure 2. Cable connections
1. Connecting Computer (
A. Connect the power cord to the DC Adaptor and connect the adaptor jack to the DC 12V power
connector on the back of the monitor.
B. Connect the 15-pin D-SUB of the video signal cable to the PC video connector on the back of
the monitor.
C. Connect the stereo audio cable to "Audio (ST)" on the back of the monitor and the other end
to " Audio Out" terminal of the sound card on your computer.
D. If necessary, please install monitor driver contained on the accompanied CD. For driver
installation, please refer "Installing Video Driver" section on page 7.
2. Connecting External A/V Devices (
A. Connect RCA (Yellow) or S-VHS cable to an appropriate external A/V device such as VCR,
DVD or camcorder.
B. Connect RCA audio cables to "Audio (R)" and "Audio (L)" terminals and the other ends to
corresponding audio out terminals on the A/V device. (Stereo-RCA cable
C. Headphone may be connected to the headphone output on the left-hand side of the monitor
marked (
6
speakers will be disabled.
3. Connecting TV/CATV (
A. Connect an antenna or CATV cable to the antenna terminal on the back of the monitor.
➮
Optional TV tuner is required. The optional TV tuner can be purchased from the local
Samsung Monitor dealers.
4. Connecting DTV Set-Top Box (
A. Connect the RCA DTV Cable to the Video port of the DTV Function on the back of the monitor.
B. Connect the RCA Cable to "Audio(L)" and "Audio(R)" on the back of the monitor and the other
end to "Audio Out" terminal of the Set-Top Box.
6
)
1 2 3
4 5
(RCA cable and S-VHS cable not included)
). While the headphone is connected, the sound from the built-in
)
7
8 9 10
English
1 2 3
)
)
5
8 9 10 10 7
not included)