Samsung SyncMaster 210P PLUS User Manual page 45

If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.
Table 1. Preset Timing Modes
General
PowerSaver
Display Mode
Preset Timing
Modes
IBM, 640 x 480
IBM, 720 x 400
VESA, 640 x 480
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1600 x 1200
Horizontal Vertical
Frequency Frequency
(kHz) (Hz)
31.469 59.940
31.469 70.087
43.269 85.008
53.674 85.061
68.677 84.997
79.976 75.025
91.146 85.024
106.250 85.000
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of
the screen horizontally is called Horizontal Cycle and the inverse
number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image many
times per second to display an image to the user. The frequency of this
repetition is called Vertical Frequency or Refresh Rate. Unit: Hz
Main > Specifications > Preset Timing Modes
Pixel Clock Sync Polarity
(MHz)
25.175
28.322
36.000
56.250
94.500
135.00
157.50
229.50
(H/V)
-/-
-/+
-/-
+/+
+/+
+/+
+/+
+/+