Av Sync Setup; Setting The Drc (Dynamic Range Compression) - Samsung MM-DC10 Instruction Manual

Setting the DRC
(Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Press Cursor
1
2
Press MENU button
to move to 'Audio' and
then press ENTER
in the stop mode.
button.
4
3
If "DRC" is selected,
press ENTER.
•
The Cursor
greater the effect, and the Cursor
button is pressed, the smaller the effect.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
43
button
Press Cursor ,
to adjust the 'DRC'.
button is pressed, the

AV SYNC Setup

Video may look slower than the audio if it is connected to a digital TV.
If this occurs, adjust the audio delay time to to match the video.
1
Press the MENU button.
•
Setup menu appears.
3 Press Cursor , buttons
to move to 'AV-SYNC' and
then press ENTER button.
•
AV-SYNC screen appears.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press Cursor , buttons
2
to move to 'Audio' and then
press ENTER button.
•
'Audio' menu appears.
Press Cursor , buttons
4
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
•
You can set the audio delay time between 0 ms and
300 ms. Set it for the best sync up with audio.
44
GB