Table of Contents
Advertisement
Disc Playback
Press OPEN/
1
2
Load a disc.
CLOSE button to
open the disc tray.
•
Place a disc gently into the
tray with the disc's label
facing up.
Note
•
Depending on the content of the disc, the initial screen may appear different.
To stop playback, press STOP during playback.
•
If pressed once, "PRESS PLAY" is displayed and the stop position will be stored in memory.
If PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
•
If pressed twice, "STOP" is displayed, and if PLAY/PAUSE (
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
•
To resume playback, press PLAY/PAUSE (
) button again.
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
•
By default, the video format is set to "PAL".
•
"NTSC" or "PAL" will appear in the display.
At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video format of your TV.
17
Press OPEN/
3
CLOSE button to
close the disc tray.
DVD
VCD
CD
•
Playback starts automatically.
) button is pressed, playback starts from the
MP3-CD Playback
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3 format can be played.
Press the
OPEN/CLOSE button
1
to open the disc tray,
and then load the
MP3 disc.
•
The MP3 menu screen will appear and
playback will start.
•
The appearance of the menu depends on
the MP3 disc.
•
WMA-DRM files cannot be played.
To change the album,
use
select another album
3
in Stop mode, and
then press the
ENTER button.
•
To select another album and track,
repeat Steps 2 and 3 above.
•
Depending on the recording mode, some MP3-CDs may not play.
Note
•
Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
To play a file icon in the screen
Press the
button when it is in stop
status and select a desired icon from the top
part of the menu.
•
To play music files only, select the
Icon.
•
To view image files only, select the
Icon.
•
To view movie files only, select the
Icon.
•
To select all files select the
Icon.
In Stop mode, use
to select
2
the album, and then
press the ENTER
button.
•
User
to select the track.
to
Press the STOP
4
button to stop
playback.
•
Music File Icon
•
Image File Icon
•
Movie File Icon
•
All File Icon
18
GB
Hide quick links:
Advertisement
Table of Contents
