Listening to Radio
Remote Control
1
Press the TUNER button to select the FM band.
2
Tune in to the desired station.
Automatic Tuning 1 : When the
Automatic Tuning 2 : Press and hold the
Manual Tuning : Briefly press the
Main Unit
1
Press the FUNCTION button to select the FM band.
2
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( ) button to select <PRESET> and then press
the
Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold
the
Manual Tuning : Press the STOP ( ) button to select <MANUAL> and then briefly press
the
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between <STEREO> and <MONO>.
In a poor reception area, select MONO for a clear, interference-free broadcast.
54
button is pressed, a preset broadcast station is selected.
,
button to automatically search for active
broadcasting stations.
button to increase or decrease the frequency incrementally.
,
button to select the preset station.
button to automatically search the band.
button to tune in to a lower or higher frequency.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1
Press the TUNER button to select the FM band.
2
Press the
button to select <89.10>.
,
3
Press the TUNER MEMORY button.
<PRGM> flashes in the display.
4
Press the
You can select between 1 and 15 presets.
5
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before <PRGM> disappears from the display.
<PRGM> disappears from the display and the station is stored in memory.
6
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the
control to select a channel.
• This unit does not receive AM broadcasts.
button to select preset number.
button on the remote
GB
55