Searching For A Specific Sequence - Samsung CHT-500 Instruction Manual

VCR
GB
38

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on
the direction selected, the indexes are numbered as follows:
Prev
Seq.
etc.
2
This DVD-VCR uses a standard indexing system (VISS).
As a result, it will recognize any indexes marked by
other VCRs using the same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for the [0:00:00] counter
position on a cassette. Press the CLEAR button at the point on the tape
where you want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the [0:00:00] counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the Go To [0:00:00]
2 Press the OK or ❿.
End Search
Use this feature when you want to search for a blank position to record
a program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
buttons, until the
End Search
2 Press the OK or ❿.
Seq. being
Next
played Seq. etc.
1 1 2
option is selected.
option is selected.
or
❷
or
❷