Fuel System Maintenance; Replacing The Fuel Filter; Servicing The Fuel Tank - Toro Z Master 74048TE Operator's Manual

Hide thumbs Also See for Z Master 74048TE:
Table of Contents

Advertisement

Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to
Fuel Safety (page 14)
list of fuel related precautions.

Replacing the Fuel Filter

Service Interval: Every 500 hours/Yearly (whichever
comes first) (more often in dusty,
dirty conditions).
Important:
Install the fuel line hoses and secure
with plastic ties the same as they were originally
installed at the factory to keep the fuel line away
from components that can cause fuel line damage.
Never install a dirty filter after removing it from the
fuel line.
The fuel filter is located near the engine on the left
front of the engine.
1.
Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Allow the machine to cool down.
4.
Replace the fuel filter
Note:
Ensure that the flow-direction arrow on
the replacement filter points toward the engine.
for a complete
(Figure
50).

Servicing the Fuel Tank

Do not attempt to drain the fuel tank. Ensure that an
Authorized Service Dealer drains the fuel tank and
services any components of the fuel system.
43
Figure 50
g033082

Advertisement

Table of Contents
loading

This manual is also suitable for:

Z master 4000 seriesZ master 74053teZ master 74056te

Table of Contents