Toro Z Master 74048TE Operator's Manual page 49

1. Spring
2. Clutch pulley
3. Mower belt
13. Install the belt guide on the idler arm
14. Using the 3/8-inch ratchet in the square hole,
install the idler spring
Note:
Ensure that the spring ends are seated
in the anchor grooves.
15. Install the belt covers
Figure 58
4. Spring-loaded idler
assembly
5. Ratchet
6. Square hole in the idler
arm for the ratchet
(Figure
(Figure 58).
(Figure 59).
g334846
58).
49
Figure 59
g027730