Table of Contents
Advertisement
Installation
STEP 5 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, press Power to turn on
the washing machine.
STEP 6 Calibration Mode
Your Samsung washing machine detects the laundry weight automatically.
For more accurate weight detection, please run Calibration Mode after the installation.
To run Calibration Mode, follow these steps:
1. Remove laundry or any contents in the machine.
2. Press and hold Water Level and Delay End simultaneously for at least 3 seconds when the power is
turned on.
3. Press Start/Pause to activate Calibration Mode.
4. The pulsator rotates clockwise and anticlockwise approximately 1 minute.
5. When Calibration Mode is finished, "0" appears on the display, and the washing machine automatically
turns off. The washing machine is now ready for use.
18
English
Untitled-4 18
CAUTION
Do not run the drain hose under the bottom of the
machine.
2023-01-06
3:53:37
Advertisement
Table of Contents
