LG WT7800CW/00 Owner's Manual page 25

Table of Contents

Advertisement

Cycle
Use this cycle to prewash stains
without needing to hand wash. Prompt
Pre Wash+
Normal
treatment helps to prevent stains from
setting or odors from developing.
This cycle is for washing lingerie or
sheer and lacy clothes which can
easily be damaged.
Delicates
Fabric type : Dress shirts/blouses, nylons,
sheer or lacy garments (less than 8 lb.)
This cycle is for washing items such as
wrinkle-free clothes or tablecloths to
minimize wrinkles.
Perm.Press
Fabric type : Dress shirts/pants,
wrinkle-free clothing, poly/cotton blend
clothing, tablecloths
Use the Speed Wash cycle to quickly
wash lightly soiled clothing and
small loads. For high wash and rinse
Speed Wash
efficiency, washing small loads of 2-3
lightly soiled garments is recommended.
Fabric type : Lightly soiled and small loads
This cycle is used for washing
waterproof material.
Fabric type : Waterproof items such
Waterproof
as water resistant clothing, mattress
covers, outdoor clothes, and plastic
mats (less than 14 lb.)
If you download a cycle using the
function, it will be placed in the
Downloaded
Downloaded cycle position. Choose the
Downloaded cycle to run the new cycle.
Description
Note
• When chime sounds, press the Start/Pause
button to unlock lid, add main detergent to
dispenser, and insert remainder of laundry. If
the Start/Pause is not pressed within about 3
minutes, the cycle continues. (If Signal is turned
off, the chime won't sound.)
-
-
• Use very little detergent in this cycle. If you want
additional rinsing, you can add extra rinses by
using the Extra Rinse button.
• Do not use any other wash cycle to wash
waterproof fabrics.
• Do not use this cycle to wash a mixed load of
waterproof and non-waterproof items.
• Check the washing instructions on items before
using this cycle.
• Do not wash other fabics using this cycle.
CAUTION
• If waterproof material laundry is washed in a
course other than Waterproof, it may result in
injury or damage to the washer, clothes, walls,
floor, and surrounding objects due to abnormal
vibration.
• The default cycle for this position is Small Load,
used for normally soiled loads with just a few
items. The Small Load cycle is also available for
download.
25
OPERATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wt7800c seriesWt7800cv/00

Table of Contents