User Information; How The Dispenser Works - Follett L78614 Installation, Operation And Service Manual

Ice and water dispensers
Table of Contents

Advertisement

Fig. 9 – Wall mount, utility location
WALL MOUNT
BRACKET
WALL
CUTOUT
1.41" (3.6 cm)
3.70" (9.4 cm)
POTABLE WATER SUPPLY
3/8 COPPER TUBE
7.88" (20.0 cm)
DRAIN
3/4 COPPER TUBE

User information

How the dispenser works

Follett's 12 series automatic-load ice and water dispensers are equipped with Follett's 425 lb (193 kg)/day ice
machine. In the continuous icemaking process, water freezes to the inside wall of the evaporator. A rotating
stainless steel auger carries the ice to the top of the evaporator where it is compressed and extruded through an
outlet port. The ice is then pushed through a tube to the storage hopper. When the hopper is full, a bin thermostat
opens and shuts the ice machine off. When the dispense mechanism is activated, a dispense motor is turned on,
causing the wheel to turn. This moves ice to the dispense chute where it drops by gravity into the container held
below the chute.
How SensorSAFE infrared dispensing works
Follett's SensorSAFE infrared dispensing maximizes sanitation and minimizes the possibility of cross-contamination
by eliminating physical contact between the cup or container and dispenser. Sensors in the panel use reflected
infrared light to detect the presence of the container and send a signal to a control board which then activates the
appropriate components for ice or water dispensing.
The SensorSAFE infrared dispensing package includes a cleaning switch under the left side of the front cover
which temporarily shuts off dispensing to allow cleaning of the panel and lenses. If the switch is not turned back on
after cleaning, the dispenser automatically resets after two minutes for normal operation.
SensorSAFE infrared dispensing also includes a time limit safety feature which automatically stops ice dispensing
after one minute of continuous dispensing. Dispensing can be resumed by moving the container away from the
dispenser and returning it to the activation zone.
10
12CI425A, 12HI425A
FRONT VIEW
1.72" (4.4 cm)
0.92" (23 mm)
11.75" (29.9 cm)
POWER CORD EXIT
water and
drain tubing
WALL
3.00"
(7.7 m)
MAX.
SIDE VIEW UTILITIES EXITING WALL

Advertisement

Table of Contents
loading

Table of Contents