Table of Contents
Advertisement
ELEctRIcAL connEctIon
The electric motor, indicator lights and related switches
are connected to the oven as follows:
The service line will enter trough the rear of the oven and
connected to the terminal block (see diagram).
1. Remove the bottom trim and control panel. Removal
of the body side is not necessary.
2. Remove knock-out in the rear of the unit and run the
supply power line to terminal block and connect the
wires.
3. Reinstall the control panel and the bottom trim.
The Blodgett Oven Company cannot assume responsibil-
ity for loss or damage suffered as a result oF improper
installation.
Connect wires to
terminal block
5
Installation
Electrical connections
Run supply line through
the knock-out
Figure 2
Advertisement
Table of Contents
