Genius Devices; Dual Bus Function Block - Emerson PACSystems RX3i Application Manual

Application Guide
GFK-2928C
Figure 28: GCG Baud Rate & Output at Startup Settings

Genius Devices

Refer to the PACSystems RX3i Genius Communications Gateway User Manual, GFK-2892C
or later, for instructions on configuring I/O devices that are attached to the GCG.
5.7

Dual Bus Function Block

The main purpose of the Dual Bus (DBUS) function block is to remap the discrete and analog
inputs from the backup bus to the main bus by monitoring the status bits of the Genius
devices that are installed on the dual bus pair.
Figure 29: Dual Bus Function Block
These are the block's external connections:
PLC Hardware Configuration
Chapter 5
Oct 2019
22