Place Into Program Blocks - Emerson PACSystems RX3i Application Manual

Application Guide
GFK-2928C

Place into Program Blocks

When function blocks are dragged from the Toolchest into the Program Blocks collection,
PAC Machine.
Edition may prompt for an entry into which a variable name must be provided.
Figure 9: PAC Machine Edition Form: Enter Variable Name
The blocks and corresponding entries are as follows:
Group03 – LDs
Block
INIT_GBnn
INIT_GB00
ALM_DEV
EXE_CR
Group04 – LDs
Block
DB_SVCS
SW_BSM
AUTO_SW
Group05 – LDs
Block
DBUS
Group06 – LDs
Block
BUSSES
Toolchest Components
Variable Name Entry
<no name required>
IGB00
DEV
CR01
Variable Name Entry
DBS
SW01
Aut_Sw
Variable Name Entry
DB00
Variable Name Entry
GBusses
Chapter 4
Oct 2019
11