D-Link DSL-124 User Manual page 42
Wireless n300 adsl2+ modem router
Hide thumbs
Also See for DSL-124:
- Quick installation manual (8 pages) ,
- User manual (2 pages) ,
- Modem configuration manual (2 pages)
Table of Contents
Advertisement
Section 4 - Configuration
WAN IP Settings:
Configure the IPv4 WAN settings. If the IP Protocol is set to IPv6,
these settings are unavailable.
Type:
Choose either Fixed (Static IP), or Dynamic IP.
The following settings are available if Type is set to Fixed:
Local IP Address:
Enter your local IP address.
Netmask:
Enter your subnet mask.
This defaults to Auto.
Default Route:
Unnumbered:
This option is unavailable.
IPv6 WAN
Configure the IPv6 WAN settings. If the IP Protocol is set to IPv4,
Settings:
these settings are unavailable.
Address Mode:
Select either Slaac or Static.
IPv6 Address:
Enter your IPv6 Static Address. Only available in Static mode.
IPv6 Gateway:
Enter your IPv6 Gateway. Only available in Static mode.
DHCPv6 Mode:
Select either Auto, Enable, or Disable.
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
Address:
Enable or Auto:
Request DHCPv6
Check this box to enable. Only available if DHCPv6 Mode is set to
PD:
Enable.
Click Add to create your connection.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
DHCP(Static IP) (continued)
37
Advertisement
Table of Contents
