Table of Contents
Advertisement
2 )
Press ▲ ▼ to select an item, and
change the setting according to the
instructions.
You can change the user
Name change
name.
ON:
DHCP
(DHCP client
OFF: If a DHCP server
function)
IP address
(Display of IP
Enter the IP address if
address and
DHCP server is not used.
setting)
Subnet mask
If not using a DHCP
(Displaying and
server, enter the subnet
setting the subnet
mask.
mask)
Default gateway
Enter the gateway address
(Display of
if DHCP server is not
gateway address
used.
and setting)
DNS1
(Display of
Enter the DNS server
Preferred DNS
address if DHCP server is
server address and
not used.
setting)
DNS2
Enter the alternate DNS
(Display of
server address if DHCP
Alternate DNS
server is not used.
server address and
setting)
"Glossary" (
Æ
page 115 – 116)
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, gateway and
z
DNS server, ask the network administrator.
A wired LAN and wireless LAN cannot be used in the
z
same segment.
3 )
Press ▲ ▼◄► to select [Next], and
press <ENTER> button.
[Wired detailed setup] screen (2/3) setting screen
is displayed.
Make the settings related to the wireless
connection between the projector and the network.
Select [Cancel] instead of [Next] to cancel the
configuration change.
If a DHCP server
exists in the
network to which
the projector is
connected, the
IP address will
automatically be
acquired.
does not exist in
the network to
which the projector
is connected,
additionally set [IP
address
], [Subnet
mask
] and
[Default gateway
].
SSID
z
Æ
"Glossary" (
page 115 – 116)
Note
SSID has to be entered in alphanumeric letters.
z
You cannot set "any" or "ANY" for SSID.
z
Mode
z
AD HOC
Infrastructure
Æ
"Glossary" (
page 115 – 116)
Authentication
z
OPEN
SHARED
WPA-PSK
2
WPA2-PSK
2
WPA-EAP/
WPA2-EAP
2
WPA-EAP
2
Network
If the mode is [AD HOC],
enter the same character
string as that of SSID set
on the computer to be
connected. If the mode is
[Infrastructure
], enter
the SSID registered at the
access point
.
Select [AD HOC] or
[Infrastructure].
Connect projector and
computer directly without
access point.
Connect through access
point.
Set the user
authentication method
used by the network to
be connected.
Select when making
a connection using
[AD HOC], or when
the access point
authentication method
is OpenSystem
.
1
Select when making
a connection using
[AD HOC], or when
the access point
authentication method
is Shared Key
.
1
Select when the
access point
authentication method
is WPA-PSK
.
1
Select when the
access point
authentication method
is WPA2-PSK
.
1
Select when the
access point
authentication method
is WPA-EAP
/
1
WPA2-EAP
.
1
Select when the
access point
authentication method
is WPA-EAP
.
1
ENGLISH -
67
Advertisement
Chapters
Table of Contents
