MSI XPOWER GAMING TITANIUM X99A Manual page 64

fPEG X - PCI_EX-Gen X [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed devices.
[Auto]
[Gen1]
[Gen2]
[Gen3]
fPCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
fSATA USB3.1 Gen1 Switch [SATA]
Allows you to switch between JUSB4 connector and SE1_65 connector. Please refer
to page 39 for SE USB switch with examples of various combination possibilities.
ACPI Settings
f
Sets ACPI parameters of onboard power LED behaviors. Press Enter to enter the sub-
menu.
fPower LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color]
[Blinking]
Integrated Peripherals
f
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
Enter to enter the sub-menu.
fOnboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
fLAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings. This
item will appear when Onboard LAN Controller is enabled.
[Enabled]
[Disabled]
fNetwork Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled]
[Disabled]
fIpv4 PXE Support [Enabled]
When "Enabled" , the system UEFI network stack will support Ipv4 protocol. This
item will appear when "Network Stack" is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
64
BIOS Setup
This item will be configured automatically by BIOS.
Enables PCIe Gen1 support only.
Enables PCIe Gen2 support only.
Enables PCIe Gen3 support only.
The power LED turns to another color to indicate the S3 state.
The power LED blinks to indicate the S3 state.
Enables the onboard LAN Boot ROM.
Disables the onboard LAN Boot ROM.
Enables UEFI network stack.
Disables UEFI network stack.