Related Manuals for ASROCK J4125-ITX
Summary of Contents for ASROCK J4125-ITX
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per AsRock J5040-ITX cerca il tuo prodotto tra le migliori offerte di Schede Madri...
- Page 2 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
- Page 3 You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply) The terms HDMI®...
-
Page 4: Table Of Contents
Onboard Headers and Connectors M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide Chapter 3 Software and Utilities Operation Installing Drivers ASRock Live Update & APP Shop 3.2.1 UI Overview 3.2.2 Apps 3.2.3 BIOS & Drivers 3.2.4 Setting Chapter 4 UEFI SETUP UTILITY Introduction 4.1.1... - Page 5 4.1.2 Navigation Keys Main Screen Advanced Screen 4.3.1 CPU Configuration 4.3.2 Chipset Configuration 4.3.3 Storage Configuration 4.3.4 Super IO Configuration 4.3.5 ACPI Configuration Tools Hardware Health Event Monitoring Screen Security Screen Boot Screen Exit Screen...
-
Page 6: Chapter 1 Introduction
ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com. -
Page 7: Specifications
• Integrated Intel® UHD Graphics 605: 18 EUs inside (Up to 800MHz) (for J5040-ITX) • Integrated Intel® UHD Graphics 600: 12 EUs inside (Up to 750MHz) (for J4125-ITX) • DX12, OpenGL 4.4, OGL ES 3.1, OpenCL 1.2 • HW Acceleration Decode: HEVC (H.265) 8 bit, HEVC (H.265)10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8,... - Page 8 J5040-ITX J4125-ITX • Supports HDCP 2.2 with DVI-D and HDMI Ports • Supports Full HD 1080p Blu-ray (BD) playback with DVI-D and HDMI Ports • 7.1 CH HD Audio with Content Protection (Realtek ALC892 Audio Audio Codec) • Premium Blu-ray Audio support • Supports Surge Protection...
- Page 9 • CASE OPEN detection • Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore • Microsoft® Windows® 10 64-bit Certifica- • FCC, CE • ErP/EuP ready (ErP/EuP ready power supply is required) tions * For detailed product information, please visit our website: http://www.asrock.com...
-
Page 10: Motherboard Layout
J5040-ITX J4125-ITX 1.3 Motherboard Layout CPU_FAN1 BIOS CMOS Battery RoHS USB 3.2 Gen1 T: USB0 B: USB1 PANEL1 USB 2.0 T: USB0 B: USB1 SPK_CI1 DDR4_B1 HD_AUDIO1 CLRMOS1 USB_0_1 USB_2 SATA3 _A1 SATA3_1 USB3_0_1 COM1 SATA3_ SATA3 _A2 AUDIO CODEC... - Page 11 No. Description CPU Fan Connector (CPU_FAN1) ATX Power Connector (ATXPWR1) System Panel Header (PANEL1) 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1) Chassis Intrusion and Speaker Header (SPK_CI1) Clear CMOS Jumper (CLRMOS1) Chassis Fan Connector (CHA_FAN1) COM Port Header (COM1) USB 2.0 Header (USB_0_1) USB 3.2 Gen1 Header (USB3_0_1) USB 2.0 Header (USB_2)
-
Page 12: I/O Panel
J5040-ITX J4125-ITX 1.4 I/O Panel No. Description No. Description PS/2 Mouse Port Microphone (Pink) D-Sub Port Optical SPDIF Out Port LAN RJ-45 Port* USB 2.0 Ports (USB_01) Central / Bass (Orange) USB 3.2 Gen1 Ports (USB3_01) Rear Speaker (Black) HDMI Port... - Page 13 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange...
-
Page 14: Chapter 2 Installation
J5040-ITX J4125-ITX Chapter 2 Installation This is a Mini-ITX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. -
Page 15: Installation Of Memory Modules (So-Dimm)
2.1 Installation of Memory Modules (SO-DIMM) This motherboard provides two 260-pin DDR4 (Double Data Rate 4) SO-DIMM slots, and supports Dual Channel Memory Technology. 1. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;... - Page 16 J5040-ITX J4125-ITX...
-
Page 17: Expansion Slot (Pci Express Slot)
2.2 Expansion Slot (PCI Express Slot) There is 1 PCI Express slot on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. -
Page 18: Jumpers Setup
J5040-ITX J4125-ITX 2.3 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. *The jumper cap is not provided. -
Page 19: Onboard Headers And Connectors
2.4 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header Connect the power (9-pin PANEL1) button, reset button and... - Page 20 J5040-ITX J4125-ITX Serial ATA3 Connectors These four SATA3 SATA3_A1 SATA3_1 (SATA3_1: connectors support SATA see p.5, No. 12) data cables for internal SATA3_A2 SATA3_2 (SATA3_2: storage devices with up to see p.5, No. 13) 6.0 Gb/s data transfer rate. (SATA3_A1: * To minimize the boot see p.5, No.
- Page 21 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2. If you use an AC’97 audio panel, please install it to the front panel audio header by the steps below: A.
-
Page 22: Wifi/Bt Module And Intel® Cnvi (Integrated Wifi/Bt) Installation Guide
J5040-ITX J4125-ITX 2.5 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key E) supports type 2230 WiFi/BT module and Intel®... - Page 23 Step 4 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module.
-
Page 24: Chapter 3 Software And Utilities Operation
J5040-ITX J4125-ITX Chapter 3 Software and Utilities Operation 3.1 Installing Drivers The Support CD that comes with the motherboard contains necessary drivers and useful utilities that enhance the motherboard’s features. Running The Support CD To begin using the support CD, insert the CD into your CD-ROM drive. The CD automatically displays the Main Menu if “AUTORUN”... -
Page 25: Asrock Live Update & App Shop
Double-click on your desktop to access ASRock Live Update & APP Shop utility. *You need to be connected to the Internet to download apps from the ASRock Live Update & APP Shop. 3.2.1 UI Overview Category Panel Hot News... -
Page 26: Apps
J5040-ITX J4125-ITX 3.2.2 Apps When the "Apps" tab is selected, you will see all the available apps on screen for you to download. Installing an App Step 1 Find the app you want to install. The most recommended app appears on the left side of the screen. The other various apps are shown on the right. - Page 27 Step 3 If you want to install the app, click on the red icon to start downloading. Step 4 When installation completes, you can find the green "Installed" icon appears on the upper right corner. To uninstall it, simply click on the trash can icon *The trash icon may not appear for certain apps.
- Page 28 J5040-ITX J4125-ITX Upgrading an App You can only upgrade the apps you have already installed. When there is an available new version for your app, you will find the mark of "New Version" appears below the installed app icon. Step 1 Click on the app icon to see more details.
-
Page 29: Bios & Drivers
3.2.3 BIOS & Drivers Installing BIOS or Drivers When the "BIOS & Drivers" tab is selected, you will see a list of recommended or critical updates for the BIOS or drivers. Please update them all soon. Step 1 Please check the item information before update. Click on to see more details. -
Page 30: Setting
J5040-ITX J4125-ITX 3.2.4 Setting In the "Setting" page, you can change the language, select the server location, and determine if you want to automatically run the ASRock Live Update & APP Shop on Windows startup. -
Page 31: Chapter 4 Uefi Setup Utility
Chapter 4 UEFI SETUP UTILITY 4.1 Introduction This section explains how to use the UEFI SETUP UTILITY to configure your system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right after you power on the computer, otherwise, the Power-On-Self-Test (POST) will continue with its test routines. -
Page 32: Navigation Keys
J5040-ITX J4125-ITX 4.1.2 Navigation Keys Use < > key or < > key to choose among the selections on the menu bar, and use < > key or < > key to move the cursor up or down to select items, then press <Enter>... -
Page 33: Main Screen
4.2 Main Screen When you enter the UEFI SETUP UTILITY, the Main screen will appear and display the system overview. -
Page 34: Advanced Screen
J5040-ITX J4125-ITX 4.3 Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration, Storage Configuration, Super IO Con- figuration and ACPI Configuration. Setting wrong values in this section may cause the system to malfunction. -
Page 35: Cpu Configuration
4.3.1 CPU Configuration Intel SpeedStep Technology Intel SpeedStep technology allows processors to switch between multiple frequencies and voltage points for better power saving and heat dissipation. CPU C States Support Enable CPU C States Support for power saving. It is recommended to keep C1 and C6 all enabled for better power saving. -
Page 36: Chipset Configuration
J5040-ITX J4125-ITX 4.3.2 Chipset Configuration Primary Graphics Adapter Select a primary VGA. Share Memory Configure the size of memory that is allocated to the integrated graphics processor when the system boots up. Onboard HD Audio Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and automatically disable it when a sound card is installed. - Page 37 ASPM This option enables/disables the ASPM support. Deep S5 Configure deep sleep mode for power saving when the computer is shut down. Restore on AC/Power Loss Select the power state after a power failure. If [Power Off] is selected, the power will remain off when the power recovers.
-
Page 38: Storage Configuration
J5040-ITX J4125-ITX 4.3.3 Storage Configuration SATA Controller(s) Enable/disable the SATA controllers. SATA Mode Selection AHCI: Supports new features that improve performance. AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance. SATA Aggressive Link Power Management SATA Aggressive Link Power Management allows SATA devices to enter a low power state during periods of inactivity to save power. - Page 39 ASMedia SATA3 Mode AHCI: Supports new features that improve performance.
-
Page 40: Super Io Configuration
J5040-ITX J4125-ITX 4.3.4 Super IO Configuration Serial Port 1 Enable or disable the Serial port 1. Serial Port Address Select the address of the Serial port. -
Page 41: Acpi Configuration
4.3.5 ACPI Configuration Suspend to RAM It is recommended to select auto for ACPI S3 power saving. ACPI HPET Table Enable the High Precision Event Timer for better performance and to pass WHQL tests. PS/2 Keyboard Power On Allow the system to be waked up by a PS/2 Keyboard. PCIE Device Power On Allow the system to be waked up by a PCIE device and enable wake on LAN. - Page 42 J5040-ITX J4125-ITX USB Keyboard/Remote Power On Allow the system to be waked up by an USB keyboard or remote controller. USB Mouse Power On Allow the system to be waked up by an USB mouse.
-
Page 43: Tools
Save UEFI files in your USB storage device and run Instant Flash to update your UEFI. Internet Flash ASRock Internet Flash downloads and updates the latest UEFI firmware version from our servers for you. Please setup network configuration before using Internet Flash. - Page 44 J5040-ITX J4125-ITX Network Configuration Use this to configure internet connection settings for Internet Flash. Internet Setting Enable or disable sound effects in the setup utility. UEFI Download Server Select a server to download the UEFI firmware.
-
Page 45: Hardware Health Event Monitoring Screen
4.5 Hardware Health Event Monitoring Screen This section allows you to monitor the status of the hardware on your system, including the parameters of the CPU temperature, motherboard temperature, fan speed and voltage. CPU Fan 1 Setting This allows you to set CPU fan 1’s speed. Configuration options: [Full On] and [Automatic Mode]. -
Page 46: Security Screen
J5040-ITX J4125-ITX 4.6 Security Screen In this section you may set or change the supervisor/user password for the system. You may also clear the user password. Supervisor Password Set or change the password for the administrator account. Only the administrator has authority to change the settings in the UEFI Setup Utility. -
Page 47: Boot Screen
4.7 Boot Screen This section displays the available devices on your system for you to configure the boot settings and the boot priority. Fast Boot Fast Boot minimizes your computer's boot time. In fast mode you may not boot from an USB storage device. The VBIOS must support UEFI GOP if you are using an external graphics card. - Page 48 J5040-ITX J4125-ITX Full Screen Logo Enable to display the boot logo or disable to show normal POST messages.
-
Page 49: Exit Screen
4.8 Exit Screen Save Changes and Exit When you select this option the following message, “Save configuration changes and exit setup?” will pop out. Select [OK] to save changes and exit the UEFI SETUP UTILITY. Discard Changes and Exit When you select this option the following message, “Discard changes and exit setup?”... - Page 50 Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
- Page 51 DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible Party Name: ASRock Incorporation Address: 13848 Magnolia Ave, Chino, CA91710 Phone/Fax No: +1-909-590-8308/+1-909-590-1026 hereby declares that the product Product Name : Motherboard J5040-ITX/J4125-ITX Model Number : Conforms to the following speci cations:...
- Page 52 EU Declaration of Conformity For the following equipment: Motherboard (Product Name) J5040-ITX/J4125-ITX/ ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) (Manufacturer Address) EMC —Directive 2014/30/EU (from April 20th, 2016)