GE PBV10 Owner's Manual & Installation Instructions page 11

REVERSING THE DOOR SWING (Cont.)
Reinstalling Freezer Door and
Middle Hinge (Cont.)
door cap, reinstall the 2 screws for door lock and 1
screw for door cap.
6. Align the hinge hole on bottom-left corner of the
8. Insert lower side hinge pin
hinge hole, carefully position
and ensure door lock engages
socket wrench and a Phillips
Head screwdriver to install
door seal, door swing and
door lock engagement before
tightening the screws.
remaining screw holes on mullion.
49-1000702 Rev. 1
Installation Instructions
Reinstalling Refrigerator Door and
Upper Hinge
remove door lock and door cap by following the
door stopper.
2. Reverse the position of the refrigerator door lock
and door cap, reinstall the 2 screws for door lock
and 1 screw for door cap. Install the door stopper
on the left corner.
3. Align the hinge hole on bottom-left corner of the
refrigerator door with middle hinge pin, then lower
the refrigerator door onto middle hinge.
4. Insert upper hinge pin into refrigerator door upper-
left hinge hole, carefully position the refrigerator
door against case and ensure door lock engages
the 4 upper hinge screws. Check vertical and
and door lock engagement before tightening the
screws.
5. Install upper hinge cover.
11