Hardware Description
SMC Tiger Card™ 10G 10GBASE-XFP Ethernet Server Adapter comes equipped
with:
• One XFP slot for 10 Gbps XFP transceivers (SR or LR)
• Three LED indicators
The components of the SMC Tiger Card™ 10G 10GBASE-XFP Ethernet Server
Adapter are shown in the figure below.
Shown with XFP module (not included)
LED Indicators
The following table describes the Tiger Card™ 10G states reported by the LEDs.
LED
Red
(Error Checking)
Green
(Link/Activity)
Amber
(Speed)
Condition Status
Off
No Fault.
On
Fault.
Off
There is no valid link on the port.
On
The card has established a valid
network connection.
Flashing
The card is receiving or transmitting
data.
Off
There is no valid link on the port.
On
The network connection is operating in
10Gbps.
Flashing
The network connection is operating at
10, 100, or 1000 Mbps.
1-3