Product Overview; Controls - Toro Pro Force 44538 Operator's Manual

Figure 8
1. Hitch pin
2. Tow vehicle hitch
3. Clevis

Product Overview

Controls

Engine Stop
Press the Engine Stop button to stop the engine
(Figure 9).
1. Nozzle direction, right
2. Engine stop
3. Throttle, fast
Engine Start
After completing the starting sequence, press the Engine
Start button to start the engine (Figure 9). Refer to
Starting the Engine for the starting sequence.
Nozzle Direction
Press the right or left button to rotate the nozzle to the
desired direction (Figure 9).
Engine Speed
Press the Fast (rabbit) or Slow (turtle) button to increase
or decrease the speed of the engine (Figure 9).
Ignition Switch
The ignition switch (Figure 10) which is used to start
and stop the engine, has three positions: OFF, RUN and
START. Rotate key clockwise to the START position
to engage the starter motor. Release the key when
the engine starts. The key will move automatically
to the ON position. To shut engine off, rotate key
counterclockwise to the OFF position.
11
Figure 9
4. Nozzle direction, left
5. Throttle, slow
6. Engine start