HP StorageWorks edge switch 2/32 Installation Manual page 72

Installing and Configuring the Edge Switch 2/32
9. Click Next. A new screen displays for selecting ports for the alerts, as shown in
Figure 2–32.
Figure 2–32: New Threshold Alerts dialog box—third screen
10. Either select Port Type or Port List.
• If you select Port Type, selecting either E_Ports or F_Ports will cause this
alert to generate for all ports configured as E_Ports or F_Ports respectively.
• If you select Port List, you can select individual ports by clicking the check
box by each port number or set all ports. Selecting Set All Ports places a
check mark by each port number. Selecting Clear All Ports will clear the
check marks by each port number.
2-46
All manuals and user guides at all-guides.com
edge switch 2/32 installation guide