HP StorageWorks edge switch 2/32 Installation Manual page 102

Flexport Upgrade Instructions
2. Choose Features from the Configure menu on the menu bar. The Configure
Feature Key dialog box displays, as shown in
Figure 3–2: Configure Feature Key dialog box
3. Click New to add a new feature key. The New Feature Key dialog box displays,
as shown in
Figure 3–3: New Feature Key dialog box
4. In the New Feature Key dialog box, enter the switch's feature key and click OK.
The Enable Feature Key dialog box displays, as shown in
Figure 3–4: Enable Feature Key dialog box
3–4
All manuals and user guides at all-guides.com
Figure 3–3.
Figure 3–2.
Figure 3–4.
edge switch 2/32 installation guide