Driver Installation - SMC Networks EZ Connect SMC2632W User Manual

Note:
The PCMCIA slot allows you to "hot swap" PC Cards any time, even
when the power of your computer is on.
4. For Windows 95/98/NT/2000, PCMCIA card and socket services
compliant with revision 2. 10 of the PCMCIA specification are
required. Please check the documents for your PCMCIA driver
before installing the software driver for the SMC2632W.
5. Install the appropriate network driver for your operating
system. Drivers can be found on the driver diskette. See "Driver
Installation and Configuration". for more information.
6. Install the configuration program for your wireless PC Card. The
SETUP.EXE file can be found on the utility diskette. See
"Configuration and Diagnostic Utility" (page 20) for more
information.

Driver Installation

The diskette labeled "Driver Diskette"_ that comes with the
package contains all the software drivers available for the EZ
Connect Wireless PC Card. Select the driver you need for your
system and refer to this guide for the installation and
configuration procedure. Any new or updated drivers can be
downloaded from SMC™s Web site at http://www.smc.com.
Windows 95/98/2000 Installation
1. Insert the PC Card into a standard Type II or III PCMCIA slot in
your notebook and then boot up the computer.
2. Windows 95/98/2000 will automatically detect the new
hardware and prompt you to install the driver. Click "Next" to
find the driver.